High Density Polyethylene (HDPE)

We offer high first-class HDPE Granules that is a multi-cause polyethylene utilized in various industrial sectors for precise packages. These HDPE Granules are sourced from dependable manufacturers and is distinctly preferred by way of customers for advanced first-rate. We offer the HDPE Granules at nominal fees to clients.

Recycled HD Granules supplied by using us, are known for their electricity as made from excellent plastic scrap. Our variety Recycled HD Granules finds software in various industries. Moreover, we provide Recycled HD Granules that are to be had in diverse specs.

About High Density Polyethylene (HDPE)

A linear polymer, High Density Polyethylene (HDPE) is prepared from ethylene by means of a catalytic procedure. The absence of branching consequences in a extra closely packed shape with a better density and really higher chemical resistance than LDPE. HDPE is also extremely more difficult and extra opaque and it could face up to as an alternative higher temperatures (one hundred twenty° Celsius for short durations, 110° Celsius continuously). High density polyethylene lends itself in particular well to blow molding, e.G. For bottles, cutting boards, dipping baskets, dippers, trays and packing containers.

HDPE Resistance

  • Excellent resistance (no attack) to dilute and concentrated Acids, Alcohols and Bases
  • Good resistance (minor attack) to Aldehydes, Esters, Aliphatic and Aromatic Hydrocarbons, Ketones and Mineral and Vegetable Oils
  • Limited resistance (moderate attack and suitable for short term use only) to Halogenated Hydrocarbons and Oxidizing Agents

HDPE Fabrication

  • Excellent for any food related products, FDA, NSF, and USDA approved for direct contact. This material machines extremely well
  • Good chemical resistance and high rigidity make it a good choice for trays and tanks
  • Other uses include pipe fittings, wear plates, hinges and cutting boards
  • Good impact resistance, light weight, very low moisture absorption, and high tensile strength. Not a good candidate for gluing. Mechanical fastening is one option, but preferably joined by hot air or nitrogen welding. Also, Ultrasonic, Laser, and infrared welding.

Quick Facts

  • Maximum Temperature : 248°F 120°C
  • Minimum Temperature : 148°F -100°C
  • Autoclavable : No
  • Melting Point : 266°F 130°C
  • Tensile Strength : 4550 psi
  • Hardness : SD65
  • UV Resistance : Poor
  • Translucent
  • Rigid
  • Specific Gravity : 0.95

Demanded For

  • High stiffness
  • Excellent mechanical properties
  • Good dimensional stability
  • High specific gravity

EXTRUSION- PIPE(Basell licensee)

Application Density(gr/cm3) MFR(gr/10min)
(5kg,190 C)		 Grade Name
PE-80 Pressure pipe, e.g. drinking water and gas pipes, waste pipes and sewer pipes, their fittings and also sheets (natural grade). 0.945 0.45 AM 5010 T2 N (EX3)
PE-80 Pressure pipes ,e.g. drinking water and gas pipes, waste pipes and sewer pipes, their fittings and also sheets(black grade) 0.954 0.45 AM 5010 T2 B (EX3B)
High quality PE-80 pressure pipe for gas and water transportation (natural grade). 0.944 0.43 AM 5010 T3 N
High quality PE-80 pressure pipe for gas and water transportation (natural grade). 0.954 0.43 AM 5010 T3 B
Top quality PE-100 pressure pipes for gas and water transportation at higher pressures or with thinner walls as PE-80(natural grade). 0.948 0.22 AM CRP 100 N
Leading PE-100 for pressure pipes for all purposes for gas, water and sewage transportation (black grade). 0.957 0.22 AM CRP 100 B
Leading PE-100,specially for drinking water(blue marker) 0.948 0.22 AM CRP 100 Blue

EXTRUSION -BLOW MOULDING(Basell licensee)

Application Density(gr/cm3) MFR(gr/10min)
(5kg,190 C)		 Grade Name
Milk bottles and shakers for power 0.957 6 AD 4760
For hollow articles where high stress cracking resistance is not demanded, such as bottles and containers up to 10 liters, e.g. for fabric softeners. 0.959 1.5 AH 4765
Containers with capacities ranging from a few ml up to 10 also for thermoforming. Also for production of sheets for thermoforming. 0.954 1.2 AF 4760
For disinfectant bottles up to 2 liters. Tubes for cosmetics, containers up to 10 liters and petrol cans up to 5 liters. 0.944 1.1 AF 4750
General purpose grade for containers from 1L to 200L capacity 0.953 0.28 AM 8255
Large containers above 10L capacity and for the production of semi-finished stock. 0.944 0.24 AM 7746
Large containers above 5L capacity and for the production of semi-finished stock. 0.952 0.11 AM 7255

EXTRUSION- TUBLAR FILM(Basell licensee)

Application Density(gr/cm3) MFR(gr/10min)

(5kg,190 C)

 Grade Name
For blown films with paper like quality, suitable for counter bags, carrier bags and wrapping films, excellent processing. 0.949 0.28 AM 9450 F
For blown films with paper  like quality, suitable for counter bags, carrier bags and wrapping films, excellent processing and sealability. 0.950 0.24 AM 9450 F1
For blown films with paper like quality, suitable for counter bags, carrier bags and wrapping films, excellent processing stiffer than HM 9450 F. 0.956 0.28 AM 9455 F
For blown films with paper like quality, suitable for counter bags, carrier bags and wrapping films, excellent process, stiffer than HM9450 F1. 0.957 0.24 AM 9455 F1
For blown films with paper like quality, suitable for counter bags, carrier bags and wrapping film, excellent processing with high tenacity. 0.944 0.18 AM 9445 HT

EXTRUSION- STRETCHED FILM and TAPE (Basell licensee)

Application Density(gr/cm3) MFR(gr/10min)
(5kg,190 C)		 Grade Name
Stretched films and tapes for production of high quality knitted and woven. 0.944 1.8 AF 7740 F
Tapes to be used for agricultural packaging and as protective cover. 0.944 1.8 AF 7740 F2

EXTRUSION-FILAMENT (Basell licensee)

Application Density(gr/cm3) MFR(gr/10min)
(5kg,190 C)		 Grade Name
Monofilament for fishing notes, geo textiles and civil engineering. 0.956 2.8 AF 7750 M2

EXTRUSION-FILAMENT(Innovene license)

Application Density(gr/cm3) MFR(gr/10min)(5kg,190 C) Grade Name
Ropes, nets, knitted sacks, woven fabrics. 0.957 0.9 HD 5710 AA

EXTRUSION- CABLE INSULATION(Basell licensee)

Application Density(gr/cm3) MFR(gr/10min)(5kg,190 C) Grade Name
Wire and cable insulation 0.946 3.5 AF 7450 K

HDPE-INJECTION MOULDING(Basell licensee)

Application Density(gr/cm3) MFR(gr/10min)(5kg,190 C) Grade Name
Light weight household and disposable articles 0.957 52 AA 7260
Household articles less hard and less rigid than I1 0.950 28 AB 6450
Transport and stacking crates, particular bottle crates 0.962 23 AC 7260
Tick walled, highly stressed transport containers, e.g. refuse bin and fish crates, screw caps and cable clips. 0.954 11 AD 7255

HDPE-INJECTION MOULDING(Innovene license)

Application Density(gr/cm3) MFR(gr/10min)
(5kg,190 C)		 Grade Name
Heavy duty and High ESCR application. 0.950 2.3 HD 5120 EA
UV resistance for thick components such as large refuse bins and pallets, boxes and dust bins. 0.955 4 HD 5740 UA
Heavy duty, High ESCR applications such as screw stopper. Caps & closures. 0.950 4.5 HD 5050 EA
Large dust bins & pails. Pallet boxes.
Products with high ESCR and UV resistance.		 0.950 4.5 HD 5050 UA
General purpose grade for rigid items such as fish boxes, Crates and tote boxes. 0.958 7 HD 6070 EA
UV stabilized for rigid items such as fish boxes, Crates and toys. 0.958 7 HD 6070 UA
Thin component, such as houseware and toys 0.950 11  HD 5211 EA
UV stabilized for thin component, such as houseware and toys 0.950 11 HD 5211 UA
Components requiring high rigidity, houseware and crates. 0.954 13 HD 5813 EA
UV stabilized for components requiring high rigidity, houseware and crates. 0.954 13 HD 5813 UA
Thin components such as food container, houseware and toys. 0.925 18 HD 5218 EA
General purpose. 0.956 20 HD 5620 EA
Thin wall injection application, housewares, caps and closures. 0.953 26 HD 5226 EA
High flow applications, Houseware, Food packaging. 0.958 55 HD 5150 EA